1. Discussed final costs
Splicing ~ £500
Detectors ~ £115 (Note: two detectors & delivery & VAT - unable to buy them singularly)
LED ~ £420
Fibre Optic Cable { ~£40,000 w/ Kevlar plating OR ~£20,000 w/o Kevlar}
These final costs seemed reasonable and only a few small bits of information are needed until this is complete.
2. Questions
(1) Kevlar - not necessary, consider just a coating (brightly coloured)
- ask manufacturer for costs w/ coating
(2) Detector to optical fibre connector - consider it and costs (get in touch with manufacturer)
(3) Lengths of cables - email the manufacturers for actual lengths as specs on website seem a bit extreme
3. What to do for FRI 25 NOV (evening at the latest)
Create a document for your section including
1. Manufacturer and spec's
2. Losses associated with your section
3. Costs of each part
Remember to include ALL websites and sources
The technical document may include print screens from the websites and pictures so if you have any particular ones that you want included also send these - if your not bothered or if there is only one then just send the links.
If you have any invoices send these - will be included in the appendix
Check all UNITS!
Also send any spreadsheets. The document itself should include all final figures.
This is so that Natalie can start to put together the technical document over the weekend - at the latest need everything Friday night! We have a meeting on friday so sure this won't be a problem.
Splicing ~ £500
Detectors ~ £115 (Note: two detectors & delivery & VAT - unable to buy them singularly)
LED ~ £420
Fibre Optic Cable { ~£40,000 w/ Kevlar plating OR ~£20,000 w/o Kevlar}
These final costs seemed reasonable and only a few small bits of information are needed until this is complete.
2. Questions
(1) Kevlar - not necessary, consider just a coating (brightly coloured)
- ask manufacturer for costs w/ coating
(2) Detector to optical fibre connector - consider it and costs (get in touch with manufacturer)
(3) Lengths of cables - email the manufacturers for actual lengths as specs on website seem a bit extreme
3. What to do for FRI 25 NOV (evening at the latest)
Create a document for your section including
1. Manufacturer and spec's
2. Losses associated with your section
3. Costs of each part
Remember to include ALL websites and sources
The technical document may include print screens from the websites and pictures so if you have any particular ones that you want included also send these - if your not bothered or if there is only one then just send the links.
If you have any invoices send these - will be included in the appendix
Check all UNITS!
Also send any spreadsheets. The document itself should include all final figures.
This is so that Natalie can start to put together the technical document over the weekend - at the latest need everything Friday night! We have a meeting on friday so sure this won't be a problem.
No comments:
Post a Comment